Clearances |
||||
|---|---|---|---|---|
| Part | Inches | Millimeters | ||
| Min. | Max. | Min. | Max. | |
Rotor |
||||
| Axial end play | 0,0025 | 0,0045 | 0,0640 | 0,1020 |
| Axial end play | 0,0030 | 0,0070 | 0,0760 | 0,2540 |
| Radial bearing clearance | 0,0030 | 0,0070 | 0,0800 | 0,1800 |
| Radial bearing clearance | 0,0030 | 0,0100 | 0,0800 | 0,1800 |
Torques |
||||
| Part | Pounds per Inch | Newtons per meter | ||
| Min. | Max. | Min. | Max. | |
Bolts |
||||
| thrust bearing | 30,0 | 35,0 | 3,4 | 3,9 |
| thrust bearing | 30,0 | 35,0 | 3,4 | 3,9 |
| backplate | 90,0 | 105,0 | 10,2 | 11,9 |
| backplate | 90,0 | 105,0 | 10,2 | 11,9 |
Shaft nut |
||||
| 1st - Tighten to | 125,0 | 150,0 | 14,1 | 17,0 |
| 1st - Tighten to | 125,0 | 150,0 | 14,1 | 17,0 |
| 2nd - Loosen the nut | ||||
| 2nd - Loosen the nut | ||||
| 3rd - Retorque to | 35,0 | 55,0 | 4,0 | 6,2 |
| 3rd - Retorque to | 35,0 | 55,0 | 4,0 | 6,2 |
| 4th - Plus additional turn of 135º-145º | ||||
| 4th - Plus additional turn of 135º-145º | ||||
V clamp |
||||
| compressor housing | 110,0 | 130,0 | 12,4 | 14,7 |
| turbine housing | 152,0 | 168,0 | 17,2 | 19,0 |
TW83
